| | | 30" Diagnostic Color Display 30bit 4MP (Model: ECD304) | | Home » Shop by MegaPixels» 4 MP» 30" Diagnostic Color Display 30bit 4MP (Model: ECD304) | | | | |  | | Availability :Contact us for availability | | |
|
| | | | | | Product overview : |  |
| | | The 30" ECD304 integrates multiple viewing modes and color-to-grayscale technology, enabling flexible viewing options. ECD304 is ideal for 3D color rendering and image fusion applications. The ECD304 is also awarded by Taiwan Excellence 2008, the highest accolade awarded to products that encapsulate innovalue.
| 30" color TFT LCD |
| Resolution-2560(H) x 1600(V) |
| Max. luminance: 370cd/m2 |
| Max. calibrated luminance: 250cd/m2 |
| 30-bit deep color technology |
| Built-in front sensor for DICOM conformance and auto-dimming function |
| Selectable Gamma 1.8,2.0,2.2 and color temperature settings |
| Single 4MP and dual 2MP viewing mode setup |
| Smart OSD for easy monitor control |
| Intelligent display mode auto adjustment with graphic card auto detection |
| Intelligent color-to-gray conversion for grayscale applications |
| IPXX/IPX2 compliant |
| |
|
Intelligent Color Display Solutions |
| 30-bit Deep Color Technology |
| 30-bit color image (10-bit for each RGB element) can be displayed on ECD304 without any image loss. Through Medical Display Pro unique technology, it's unnecessary to replace the monitors for future HDMI™ 1.3 supported deep color display capabilities. |
| |
| Multiple Viewing Modes and Color to Grayscale Technology |
| Medical Display Pro has designed multiple viewing setups and color to grayscale technology into our 4MP ECD304 color display,bringing the intelligence and flexibility to your imaging workstation. Through color to grayscale technology,the RGB signal received can be accurately reproduced in grayscale via conversion function. Medical Display Pro allows you to choose within a wide range of viewing modes for your Medical Display applications |
| Single Viewing Mode |
| In single viewing mode, the ECD304 is displayed as a single 4MP monitor, either in color or in grayscale mode. |
|
| Dual Viewing Mode |
| In dual viewing mode, ECD304 is configured to display as seamless dual 2MP monitor by two DVI signal inputs. With color to grayscale technology, ECD304 can be viewed as multiple modes without change to your Medical Display configuration.The independent Look-Up-Table for DICOM and Gamma calibration ensures the best display quality for diagnostic applications. |
|
|
 |
| Auto-Dimming for Ambient Light Adjustment |
 |
| With the front sensor that auto-detects the amount of light in the viewing environment and auto-adjusts the brightness of the display, the auto-dimming function helps create better diagnostic experience under proper light condition and extend backlight lifetime. |
|
|
| |
| User Selectable Gamma Settings and Color Temperature Settings |
Medical Display Pro provides you with flexible Gamma settings and color temperature settings
for side-by-side image comparison in dual-viewing modes. The independent
Gamma settings (Gamma 1.8,2.0,2.2) and color temperature settings (6500K, 9300K) provides flexible display modes for images from different modalities. |
|
 |
| |
100% Compatible with VESA DDC/CI Protocol |
|
ECD304 is implemented with the VESA DDC/CI protocol and the standard VESA Monitor Control Command Set (MCCS). The ECD304 allows easier two-way communications with the host PC with only a DVI cable. Additional serial or USB cables are not necessary. Through DDC/CI protocol, the software OSD manages
some ECD304 functions remotely. This reduces the maintenance cost for the end user. Medical Display Pro also provides software OSD customization services with a command library and customer defined MSSC command programming supports for easier software development.
|
Various software OSD functions:
• Power mode control – On/Off
• Display mode selection: 4MP/2MP, color/monochrome
• Gamma and color temperature selection
• Luminance selection
• DICOM/ Gamma Look-Up-Table selection
• Monitor Information
|
 |
Built-in Front Sensor for Continuous DICOM Conformance Testing
For superior image quality, Medical Display Pro has designed a built-in sensor onto the front of the display. The front-mounted sensor can further provide you the flexibility of continuous DICOM conformance testing. The compact and front-mounted sensor continually monitors the luminance output to ensure consistent and reliable image over time, allowing the best diagnostic experience.
|
|
Built-in Front Sensor |
|
IPX2 Compliance
The whole enclosure of ECD304 is compliant with IPX2 waterproof standard. The ECD304 can be used in the operating room where is humid and waterproof is considered important. |
| Medical Display Pro |
 ECD304 |
| Drive System |
a-Si TFT active matrix |
Default gamma |
Gamma 2.2 |
| Display area (H x V) |
641.3mm x 400.8 mm |
LUT |
10-bit for each RGB |
| Diagonal size of display |
75.6cm (30.0 inches) |
USB 2.0 hub |
1 upstream/
2 downstream |
| Resolution (H x V) |
2560 x 1600 |
Signal input |
Dual link DVI-D (digital) |
| Display color |
16,777,216 colors |
Membrane keypad |
Yes |
| Pixel pitch (H x V) |
0.2505mm x 0.2505 mm |
Sub-pixel pitch (H x V) |
0.0835mm x 0.2505 mm |
| Pixel format |
RGB (Red dot, Green dot, Blue dot) vertical stripe |
Max. Luminance (calibrated) |
250cd/m2 |
| Luminace-max. |
370cd/m2 |
Contrast ratio |
1000:1 (typical) |
| Backlight |
16 CCFL |
Physical dimensions
(H x W x D) |
With stand: 522mm x 736mm x 266 mm (landscape)
Without stand: 480mm x 736mm x 76 mm (landscape) |
| Viewing angle |
Right/Left: 178° Up/Down: 178° |
Power adapter
Input voltage range |
100VAC-240VAC |
| Response time (Ton + Toff) |
12ms (typical) |
Power adapter
Input frequency range |
47Hz-63Hz |
| Polarizer surface/ hardness |
Antiglare/ 3H |
Power adapter
Input AC current |
2.0A (max). at 90VAC |
| Operating temperature |
10°C ~ 35 °C |
Power adapter
Power output |
24VDC, 6.25A, 150W (max) |
| Operation relative humidity |
30% ~ 75%
Non-condensing |
Storage temperature |
0°C ~ 45 °C |
Storage/ Transportation
Relative humidity |
10% ~ 95%
Non-condensing |
|
|
| Graphic Card Solutions |
 |
nVIDIA QUADRO FX560/FX1500
nVidia GeForce 8600GT |
| |
|
|
 |
| ATI V7100/V3400 |
|
|
|
| |
|
| Part No. |
Description |
ECD304
|
4 megapixel, 30" color LCD monitor with IPX2 housing |
| ECD304x |
4 megapixel, 30" color LCD monitor with IPXX housing |
|
|
|
|
| |
|
| Description |
Amount |
| Medical Display Pro Series medical LCD monitor |
1 |
| Monitor stand |
1 |
| Power Cord (US x 1, EU x 1) |
1 |
| DVI-D Signal Cable |
1 |
| USB Cable |
1 |
Utility CD-ROM
(for user's manual and software utility) |
1 |
|
|
| | | | | | | |
| | |
| | | | | | | | | | | |
| 30" Diagnostic Color Display 30bit 4MP (Model: ECD304) | |  | |
|
| | |
|
